TASKI Standard Scrubbing Brush 13″ / 33cm for Swingo 1650 & 1655 – 1 Brush

TASKI Swingo Standard Brush

The TASKI Swingo Standard Brush is a genuine replacement scrubbing brush for professional floor cleaning. It fits the TASKI Swingo 1650 and Swingo 1655 scrubber dryers.

Each brush measures 13″ / 33cm. As a result, it provides the correct size for the compatible machines. Its bristles help remove dirt from uneven and textured floors.

Furthermore, this standard brush supports regular commercial cleaning. It offers a practical solution when your existing brush becomes worn or damaged.

TASKI Swingo Standard Brush – Quantity Required

The TASKI Swingo 1650 and 1655 use a twin-brush cleaning system. Therefore, each machine requires two 13″ / 33cm brushes.

However, this listing supplies just one brush. You can therefore replace a single damaged brush without buying a complete set.

• Quantity supplied: 1 brush
• Price: Per brush
• Quantity required per machine: 2 brushes
• Complete replacement set: Order quantity 2

For this reason, please select quantity 2 if you need to replace both brushes on your machine.

13″ / 33cm Standard Scrubbing Brush

Each brush has a nominal diameter of 13 inches / 33cm. Its bristles provide mechanical scrubbing action during normal machine operation.

In addition, the brush helps loosen everyday dirt from suitable floor surfaces. Consequently, operators can maintain consistent cleaning results during routine maintenance.

The brush is particularly useful where floor texture makes cleaning with a flat pad more difficult.

Cleaning Uneven and Textured Floors

Uneven floors can present additional cleaning challenges. However, a standard scrubbing brush can help maintain contact across textured surfaces.

Its bristles reach into suitable surface irregularities. As a result, the brush can help remove dirt from areas that a flat cleaning pad may not reach as effectively.

Nevertheless, always check the floor manufacturer’s cleaning recommendations before selecting a brush.

Professional Commercial Floor Cleaning

The standard scrubbing brush supports a wide range of routine floor care tasks. For example, cleaning teams can use it for general scrubbing and regular floor maintenance.

Suitable applications include:

• Daily commercial floor cleaning
• General floor scrubbing
• Routine maintenance programmes
• Suitable uneven floor surfaces
• Textured commercial flooring
• Professional floor care
• Regular cleaning schedules

Additionally, regular brush inspections help maintain cleaning performance. Replace worn brushes when they no longer provide effective floor contact.

TASKI Swingo Standard Brush for the 1650

The TASKI Swingo Standard Brush is suitable for the TASKI Swingo 1650 scrubber dryer.

This machine requires two 13″ / 33cm brushes. Therefore, order quantity 2 when replacing the complete brush set.

Alternatively, order one brush if you only need an individual replacement.

Compatible with the TASKI Swingo 1655

The brush also fits the TASKI Swingo 1655 scrubber dryer. Like the 1650, this machine uses two brushes.

Consequently, you should check both existing brushes before ordering. If both show significant wear, replacing the pair can help maintain even cleaning performance.

Remember that the advertised price covers one brush only.

Benefits of a Standard Scrubbing Brush

A standard scrubbing brush provides a practical cleaning solution for compatible commercial scrubber dryers.

In particular, its bristles help maintain contact with suitable uneven surfaces. Furthermore, regular replacement helps maintain reliable cleaning performance.

Key benefits include:

• Effective mechanical scrubbing action
• Good contact with suitable uneven surfaces
• Support for routine floor cleaning
• Reliable commercial cleaning performance
• Simple replacement of worn brushes
• Robust construction
• Genuine TASKI quality

Brush or Pad Driver – Which Should You Choose?

The correct accessory depends on your floor surface and cleaning requirements.

For example, a scrubbing brush can provide effective contact with suitable uneven or textured flooring.

In contrast, a pad driver holds compatible floor cleaning pads. Different pads support different cleaning and floor care tasks.

Therefore, consider the floor type, cleaning method and machine requirements before ordering.

ATC Cleaning & Janitorial Supplies Ltd can supply both brushes and compatible pad drivers.

TASKI Swingo Standard Brush – Key Features

The TASKI Swingo Standard Brush offers genuine TASKI construction and compatibility with the specified scrubber dryers.

• Genuine TASKI replacement accessory
• Standard scrubbing brush design
• Suitable for TASKI Swingo 1650
• Suitable for TASKI Swingo 1655
• 13″ / 33cm nominal brush diameter
• Suitable for routine floor cleaning
• Designed for suitable uneven surfaces
• Professional commercial cleaning accessory
• Product code: 7515516
• Quantity supplied: 1 brush
• Price applies to one brush
• Two brushes required per machine

Technical Specifications

Before ordering, check the following product details against your machine and existing brush.

When Should You Replace the Brushes?

Scrubbing brushes gradually wear during regular use. Therefore, inspect both brushes as part of your machine maintenance routine.

Look for the following signs:

• Short or heavily worn bristles
• Damaged brush sections
• Uneven bristle wear
• Poor contact with the floor
• Reduced cleaning performance
• Visible damage to the brush

If you notice these problems, check whether the brush needs replacing. In addition, inspect the second brush to identify any uneven wear.

Replacing worn brushes can help restore effective cleaning performance.

Replacing Both Brushes

The TASKI Swingo 1650 and 1655 each require two brushes. Therefore, check the condition of both before purchasing replacements.

If both brushes have similar levels of wear, consider replacing them together. This can help maintain consistent contact with the floor.

However, you can still purchase one brush when only a single replacement is necessary.

For a complete replacement set, order quantity 2.

Check Your Machine Before Ordering

Before placing your order, confirm that the brush matches your machine.

In particular, check these details:

• Machine model
• Machine serial number
• Existing brush diameter
• Required brush type
• Quantity needed

This listing supplies one TASKI Standard Scrubbing Brush, 13″ / 33cm.

For a complete machine set, you will need two TASKI Standard Scrubbing Brushes.

If you are unsure about compatibility, contact ATC with your machine model and serial number.

Genuine TASKI Spare Parts

ATC Cleaning & Janitorial Supplies Ltd supplies genuine TASKI spare parts and cleaning accessories throughout the UK.

Our range includes:

• Standard scrubbing brushes
• Abrasive scrubbing brushes
• Pad drivers
• Floor cleaning pads
• Squeegee blades
• Batteries
• Battery chargers
• Wheels and hoses
• Filters and machine components

Furthermore, our team can help you identify suitable replacement accessories for your TASKI equipment.

TASKI Scrubber Dryer Parts

We supply replacement parts for a wide range of TASKI floor cleaning machines.

For example, our range includes brushes, pad drivers, batteries, chargers and other maintenance components.

Additionally, you can view our TASKI Swingo 13″ / 33cm Pad Driver for the Swingo 1650 and 1655.

As a result, you can source compatible cleaning accessories from the same supplier.

Frequently Asked Questions

Does this brush fit the TASKI Swingo 1650?

Yes. This standard scrubbing brush is suitable for the TASKI Swingo 1650.

Does it fit the TASKI Swingo 1655?

Yes. It is also suitable for the TASKI Swingo 1655 scrubber dryer.

How many brushes does the Swingo 1650 require?

The machine requires two 13″ / 33cm brushes. Therefore, order quantity 2 for a complete set.

How many brushes does the Swingo 1655 require?

The Swingo 1655 also requires two brushes. However, this listing supplies one brush per unit ordered.

Is the advertised price for one or two brushes?

The displayed price covers one brush only.

How many brushes will I receive?

When you order quantity 1, you receive one TASKI 13″ / 33cm Standard Scrubbing Brush.

What should I order for a complete set?

Order quantity 2. You will then receive the two brushes required for one compatible machine.

What size is each brush?

Each brush measures 13″ / 33cm.

Is this suitable for uneven floors?

Yes. The standard brush is designed for suitable uneven surfaces. Nevertheless, always confirm that the brush matches your flooring requirements.

What is the product code?

The genuine TASKI product code is 7515516.

Is this a genuine TASKI part?

Yes. This listing is for a genuine TASKI cleaning accessory.

Do you also sell the pad driver?

Yes. We also supply the TASKI 13″ / 33cm Pad Driver, product code 7515515.

Additionally, each compatible machine requires two pad drivers when using that accessory system.

Why Buy from ATC Cleaning & Janitorial Supplies Ltd?

ATC Cleaning & Janitorial Supplies Ltd supplies professional cleaning machines, accessories and genuine spare parts throughout the UK.

As a family-run business, we focus on helpful customer service and competitive pricing.

Furthermore, our team can assist with replacement brushes, pad drivers, floor pads, batteries and chargers.

If you need help identifying a part, simply provide your machine model and serial number.

We also offer a price match guarantee on like-for-like products, with no compromise on quality.

For assistance, call 01793 481416 or email sales@atcjanitorial.co.uk.

Manufacturer Information

For additional product information, visit the official TASKI manufacturer listing.

TASKI Standard Scrubbing Brush 13″ / 33cm – Product 7515516.

Finally, the TASKI Swingo Standard Brush provides a genuine replacement option for compatible Swingo 1650 and 1655 scrubber dryers. Remember to order two brushes when replacing the complete set.