TASKI Abrasive Scrubbing Brush 17″ / 43cm for Swingo 1650 & 4000 – 7517861 – 1 Brush

TASKI Abrasive Scrubbing Brush 17″ / 43cm – 7517861

The TASKI Abrasive Scrubbing Brush is designed for demanding floor cleaning. Measuring 17″ / 43cm, it provides strong mechanical scrubbing action on suitable hard floors. Furthermore, it helps loosen stubborn dirt that routine cleaning may leave behind.

This genuine TASKI brush is suitable for compatible Swingo 1650 and Swingo 4000 scrubber dryers. As a result, it offers a practical solution for periodic deep cleaning.

TASKI Abrasive Brush for Swingo 1650 and 4000

The TASKI Abrasive Scrubbing Brush is listed for compatible Swingo 1650 and Swingo 4000 machines. Therefore, it is important to confirm your machine model before ordering.

Its genuine TASKI product code is 7517861. Additionally, checking the existing brush size will help you select the correct replacement.

• TASKI Swingo 1650
• TASKI Swingo 4000
• Brush diameter: 17″ / 43cm
• Product code: 7517861

If you are unsure about compatibility, contact ATC with your machine model and serial number.

Two TASKI Abrasive Scrubbing Brushes Required

Each compatible machine requires two 17″ / 43cm brushes. However, this product listing supplies just one brush.

Therefore, the displayed price is for one brush only. To purchase a complete pair, simply order quantity two.

• One abrasive scrubbing brush supplied
• Price displayed per individual brush
• Two brushes required per machine
• Order quantity two for a complete set

Alternatively, you can order one brush if you only need a single replacement.

Deep Cleaning with a TASKI Abrasive Brush

The TASKI abrasive brush is intended for tougher cleaning applications. Unlike a standard daily cleaning brush, it provides stronger mechanical action.

For example, textured floors can trap dirt within their surface. Consequently, the brush helps loosen deposits during machine scrubbing.

In addition, its abrasive design makes it useful for periodic cleaning where suitable floor finishes require extra attention.

Always confirm that the surface can withstand abrasive cleaning before use.

Cleaning Structured Stoneware Floors

Structured stoneware often contains small grooves that collect dirt. As a result, normal cleaning methods may struggle to reach every area.

The TASKI Abrasive Scrubbing Brush provides direct contact with suitable textured surfaces. Furthermore, its mechanical action helps loosen stubborn deposits.

For best results, choose the correct cleaning chemical and follow the machine manufacturer’s instructions.

Abrasive Brush for Garden Tiles

Suitable garden tiles can develop stubborn surface dirt over time. Therefore, periodic scrubbing may be necessary to restore their appearance.

This 43cm abrasive brush helps loosen dirt from compatible textured tiles. However, not every tile finish is suitable for abrasive cleaning.

Before starting, test a small area and check the surface manufacturer’s cleaning guidance.

TASKI Abrasive Brush for Paving Stones

Paving stones can collect dirt within their textured surfaces. Consequently, a suitable scrubbing brush can help improve cleaning results.

The TASKI abrasive brush provides mechanical contact with the floor. In addition, its design supports demanding deep-cleaning applications.

Nevertheless, always confirm that the paving material and cleaning machine are suitable for the task.

Professional Floor Cleaning Applications

Professional cleaning teams often need different brushes for different surfaces. For example, routine maintenance may require a softer brush.

However, stubborn dirt on suitable textured floors may need stronger scrubbing action. Therefore, the TASKI Abrasive Scrubbing Brush is designed for demanding applications.

Typical uses include:

• Periodic deep floor cleaning
• Structured stoneware cleaning
• Suitable garden tile cleaning
• Compatible paving stone cleaning
• Removal of stubborn surface dirt
• Cleaning textured hard floors

Before use, always check the floor manufacturer’s recommendations.

Benefits of the TASKI Abrasive Scrubbing Brush

The TASKI Abrasive Scrubbing Brush offers several benefits for professional floor maintenance. Firstly, it provides stronger mechanical action than a standard routine cleaning brush.

Secondly, its 43cm size is designed for compatible TASKI scrubber dryers. Additionally, the brush helps reach dirt on suitable textured surfaces.

• Genuine TASKI replacement accessory
• Strong mechanical scrubbing action
• Designed for demanding deep cleaning
• Suitable for structured stoneware
• Suitable for compatible garden tiles
• Suitable for compatible paving stones
• 17″ / 43cm brush diameter
• Compatible with listed TASKI machines
• Product code 7517861

As a result, it provides a useful option for maintaining suitable hard floors.

TASKI Swingo 1650 Abrasive Brush

The TASKI Swingo 1650 uses compatible 43cm brushes for floor cleaning. In particular, this abrasive version is intended for demanding applications.

Each machine requires two brushes. Therefore, order quantity two when replacing the complete pair.

Remember, the displayed price covers one brush only.

TASKI Swingo 4000 Abrasive Brush

The TASKI Abrasive Scrubbing Brush is also listed for compatible Swingo 4000 machines. Furthermore, its abrasive construction supports deep cleaning on suitable surfaces.

As with the Swingo 1650, two brushes are required per machine. Consequently, customers replacing both brushes should order quantity two.

Before purchasing, confirm your machine model and existing brush specification.

Technical Specifications

What Is Included with Your TASKI Brush?

Your order includes one genuine TASKI Abrasive Scrubbing Brush, product code 7517861.

Although the compatible machine requires two brushes, this listing is priced individually. Therefore, select quantity two if you need a complete replacement set.

Alternatively, purchase quantity one when replacing a single worn or damaged brush.

Choosing Between an Abrasive Brush and Standard Brush

A standard scrubbing brush is generally suitable for routine floor cleaning. However, more demanding applications may require stronger mechanical action.

The TASKI abrasive version is designed for deep cleaning. For example, it can help loosen stubborn dirt from suitable structured stoneware.

Nevertheless, abrasive brushes should only be used on compatible surfaces. Therefore, always check the floor manufacturer’s recommendations.

Comparing a Scrubbing Brush and Pad Driver

A pad driver holds a removable floor cleaning pad. In contrast, a scrubbing brush makes direct contact with the surface through its bristles.

Consequently, brushes can be useful when cleaning suitable textured flooring. However, the correct accessory depends on the surface and cleaning task.

If you need advice, ATC can help identify suitable TASKI cleaning accessories.

When Should TASKI Scrubbing Brushes Be Replaced?

Regular brush inspections help maintain cleaning performance. Therefore, check both brushes during routine machine maintenance.

Look for the following signs of wear:

• Worn or shortened bristles
• Damaged brush sections
• Uneven brush wear
• Poor contact with the floor
• Reduced cleaning performance
• Visible damage to the brush assembly

If either brush becomes damaged, replace it when necessary. Furthermore, check the condition of the second brush before ordering.

Should Both TASKI Brushes Be Replaced Together?

Compatible machines use two brushes during operation. As a result, both brushes should be checked for wear.

If both have similar levels of wear, replacing the pair may be appropriate. Therefore, order quantity two when both brushes need replacement.

However, if only one brush requires replacement, you can purchase a single unit.

Check Your TASKI Brush Before Ordering

Before ordering, confirm the machine model and brush specification. This helps reduce the risk of purchasing an incorrect accessory.

In particular, check the following details:

• TASKI machine model
• Machine serial number
• Existing brush diameter
• Required brush type
• Original TASKI product code
• Number of brushes needed

The product code for this abrasive brush is 7517861. If you are unsure, contact ATC for assistance.

TASKI Scrubber Dryer Spare Parts

ATC Cleaning & Janitorial Supplies Ltd supplies genuine TASKI scrubber dryer spare parts throughout the UK. Furthermore, we can help customers identify suitable replacement accessories.

Our range includes:

• Abrasive scrubbing brushes
• Standard scrubbing brushes
• Pad drivers
• Floor cleaning pads
• Squeegee blades
• Batteries and chargers
• Wheels and hoses
• Filters and replacement parts

For more options, explore our TASKI Scrubber Dryer Spare Parts category.

TASKI Professional Cleaning Machines

In addition to replacement brushes, ATC supplies TASKI professional cleaning machines. Our range supports commercial cleaning and professional floor maintenance.

For example, customers can explore scrubber dryers, sweepers and other TASKI equipment. Furthermore, our team can help with suitable machine accessories.

Browse our TASKI Professional Cleaning Machines range.

Official TASKI Product Information

For additional manufacturer information, visit the official TASKI website. You can also check the latest product guidance and machine information.

Visit TASKI Official Website.

Frequently Asked Questions

What is the TASKI Abrasive Scrubbing Brush used for?

It is designed for demanding deep-cleaning applications. In particular, it provides strong mechanical scrubbing action on suitable hard floors.

Which machines are compatible?

The brush is listed for compatible TASKI Swingo 1650 and Swingo 4000 machines. However, always check your model before ordering.

What is the TASKI product code?

The genuine TASKI product code is 7517861.

What size is the brush?

This abrasive scrubbing brush measures 17″ / 43cm.

How many brushes are required?

Each compatible machine requires two brushes. Therefore, order quantity two for a complete pair.

Is the displayed price for one brush?

Yes. The displayed price is for one brush only.

Can I order a single replacement brush?

Yes. Simply select quantity one if you only need a single replacement.

Can the brush clean structured stoneware?

Yes. Structured stoneware is listed as a suitable application. However, always confirm that the floor finish can withstand abrasive cleaning.

Is it suitable for garden tiles?

Suitable garden tiles are among the listed applications. Nevertheless, test a small area before cleaning.

Can it be used on paving stones?

Yes. Paving stones are listed as an application. However, check surface compatibility before use.

Is this a standard daily cleaning brush?

No. This is an abrasive brush intended for more demanding cleaning tasks. Therefore, it should be selected according to the floor type.

Can ATC help confirm compatibility?

Yes. Send us your TASKI machine model and serial number. Our team can then help identify the appropriate replacement accessory.

Why Buy TASKI Abrasive Brushes from ATC?

ATC Cleaning & Janitorial Supplies Ltd supplies professional cleaning equipment and genuine TASKI spare parts across the UK.

Furthermore, our team can assist with identifying suitable brushes, pad drivers, batteries and other machine accessories.

We support commercial cleaning companies, facilities management teams, healthcare providers, educational establishments and hospitality businesses.

In addition, we offer free local delivery on qualifying orders over £50 plus VAT.

Therefore, whether you need one replacement brush or a complete pair, ATC can help you find the correct TASKI accessory.

For assistance, call 01793 481416 or email sales@atcjanitorial.co.uk.