Prochem Proshine High Gloss Metalised Emulsion Self Shining Polish 5L

Prochem Proshine Floor Polish 5L

Prochem Proshine Floor Polish is a professional high-gloss, self-shining floor finish designed to protect and enhance suitable hard floors. Its metalised emulsion formula creates a durable, attractive coating for commercial environments. As a result, floors gain a polished appearance while benefiting from everyday wear protection.

In addition, this premium floor polish contains 25% polymer solids to help improve durability and gloss retention. The ready-to-use formula requires no dilution, making application straightforward for professional cleaning teams.

Furthermore, Prochem Proshine dries to a glossy finish without requiring buffing immediately after application. Therefore, businesses can achieve excellent results while reducing routine floor maintenance time.

Key Benefits of Prochem Proshine Floor Polish

This professional floor finish combines strong protection with an attractive appearance. Consequently, it is a practical choice for commercial floor care programmes.

• High-gloss finish: Creates a deep, professional shine.
• Self-shining formula: No buffing required immediately after application.
• 25% polymer solids: Supports a durable protective coating.
• Metalised emulsion: Helps improve wear resistance and gloss retention.
• Ready to use: Requires no dilution with water.
• Excellent coverage: Approximately 250m² per 5 litre container per coat.
• Versatile application: Suitable for several compatible hard floor types.
• Professional results: Ideal for commercial cleaning and floor maintenance.

Moreover, the protective finish helps maintain the appearance of floors exposed to regular foot traffic. This makes it particularly useful in busy workplaces.

Professional High Gloss Floor Protection

Commercial floors experience daily wear from footwear, equipment and general activity. Therefore, a suitable protective coating can help maintain their appearance.

Prochem Proshine Floor Polish forms a high-gloss finish over compatible flooring. In addition, the coating helps protect the surface against everyday wear.

As a result, floors can retain a cleaner, brighter appearance between maintenance treatments. However, regular cleaning remains important for long-term performance.

For best results, always prepare the floor correctly before applying the polish.

25% Polymer Solids Metalised Emulsion

The product contains 25% polymer solids within its metalised emulsion formula. Consequently, it provides a durable coating designed for professional floor finishing.

In addition, the high-solids formulation supports gloss retention and surface protection. This helps reduce the need for frequent full refinishing when floors receive appropriate maintenance.

Furthermore, the coating is designed to withstand routine commercial use. However, performance will depend on floor condition, traffic levels and cleaning methods.

Self-Shining Finish Without Initial Buffing

Traditional floor finishing can involve additional polishing work. However, Prochem Proshine uses a self-shining formula that develops its gloss as it dries.

Therefore, operators do not need to buff the floor immediately after applying the finish. This can save time during planned floor maintenance.

In addition, the polished appearance helps create a welcoming environment for staff and visitors.

Suitable Hard Floor Surfaces

Prochem Proshine Floor Polish is designed for use on compatible hard flooring. However, always check the flooring manufacturer’s recommendations before treatment.

Suitable surfaces listed in the existing product information include:

• Vinyl flooring
• Linoleum flooring
• Compatible rubber flooring
• Suitable sealed wood flooring
• Other smooth, non-porous hard floors approved for polish application

In addition, test a small, discreet area before treating an entire floor. This helps confirm that the finish is suitable for the surface.

Do not apply the polish to floors where a coating may affect slip resistance or conflict with the flooring manufacturer’s instructions.

Commercial Floor Maintenance Applications

Busy commercial premises need floors that look professional and remain easy to maintain. Therefore, Prochem Proshine is a useful option for planned floor care programmes.

Typical environments include:

• Offices and commercial buildings
• Hotels and hospitality venues
• Schools and colleges
• Retail shops and showrooms
• Healthcare and care facilities
• Reception areas and corridors
• Public buildings
• Facilities management sites
• Professional cleaning contractors

Furthermore, the finish can help improve floor presentation in areas with regular foot traffic. However, cleaning teams should select the correct maintenance routine for each location.

Prochem Proshine Floor Polish Coverage

The 5 litre container provides approximately 250m² of coverage per coat, according to the existing product information. Therefore, it offers practical coverage for larger commercial areas.

However, actual coverage may vary depending on floor porosity, surface condition and application technique.

For example, rough or absorbent flooring may require more product than a smooth, properly prepared surface.

In addition, applying thin, even coats helps achieve a consistent finish and avoid unnecessary product waste.

Ready-to-Use Floor Polish

Prochem Proshine is supplied ready to use. Consequently, operators do not need to dilute it with water before application.

This makes preparation easier and helps maintain consistent application strength. Furthermore, the formula is suitable for use with an appropriate mop or floor polish applicator.

However, always use clean equipment and follow the manufacturer’s application guidance.

How to Apply Prochem Proshine Floor Polish

Correct preparation and application are essential for a durable, high-gloss finish. Therefore, follow the steps below alongside the current Prochem product instructions.

Step 1: Prepare the Floor

First, remove loose dirt and thoroughly clean the surface. If necessary, strip away old polish using a suitable floor stripping product such as Prochem Prostrip.

Next, rinse the floor as required and allow it to dry completely. This helps the new coating bond evenly to the prepared surface.

Step 2: Apply the First Coat

Apply the ready-to-use polish evenly using a slightly damp, suitable mop or polish applicator. In addition, work systematically across the floor to avoid missed areas.

Use thin coats rather than applying too much product at once. As a result, the finish can dry more evenly.

Step 3: Allow the Polish to Dry

Allow approximately 30 to 60 minutes between coats, as stated in the existing product guidance. However, drying time will depend on temperature, ventilation and floor conditions.

Therefore, always ensure each coat is fully dry before applying the next.

Step 4: Apply Additional Coats

For best results, the original product information recommends two to three thin coats. This helps build a consistent high-gloss finish.

Furthermore, additional coats can improve overall appearance and protection when applied correctly.

Step 5: Allow Final Drying

Finally, allow the finished floor to dry fully before reopening it to foot traffic. In addition, keep the area clearly marked while the coating is wet.

Do not return furniture or equipment until the finish has dried sufficiently.

Maintaining the High Gloss Finish

Regular maintenance helps preserve the appearance of treated flooring. Therefore, use suitable cleaning products and methods that will not damage the coating.

For example, remove dust and loose dirt regularly. In addition, clean spills promptly using an appropriate floor cleaning solution.

The original product information also recommends periodic spray buffing with Prochem Protreat. This can help refresh gloss levels and maintain floor presentation.

However, always confirm that the maintenance product and method are compatible with the existing finish.

Removing Old Floor Polish

Over time, a floor finish may become worn or require replacement. Therefore, a planned stripping and recoating process may be necessary.

The existing product guidance recommends Prochem Prostrip for removing old polish. However, operators must follow the stripping product instructions and check flooring compatibility.

After stripping, rinse and prepare the surface thoroughly. Then allow it to dry before applying a fresh coating.

Product Specifications

• Product name: Prochem Proshine High Gloss Metalised Emulsion Self Shining Polish
• Brand: Prochem
• Product type: Professional self-shining floor polish
• Container size: 5 litres
• Formula: Metalised emulsion
• Polymer solids: 25%
• Finish: High gloss
• Appearance: White emulsion
• Fragrance: Mild acrylic scent
• Dilution: Ready to use
• Coverage: Approximately 250m² per coat per 5L container
• Recommended coats: Two to three thin coats
• Drying time: Approximately 30–60 minutes between coats
• Application: Suitable mop or polish applicator
• Floor types: Compatible vinyl, linoleum, rubber, sealed wood and smooth hard flooring

These specifications reflect the existing product information. Therefore, check the latest manufacturer technical data sheet before use.

Safety and Storage Information

Always read the product label and safety data sheet before application. In addition, follow your workplace COSHH assessment.

• Use only as directed by the manufacturer.
• Do not shake the container before use, according to the original product instructions.
• Avoid contact with eyes and skin.
• Wear suitable protective equipment where required.
• Keep the container closed when not in use.
• Store upright in a cool, dry place.
• Keep out of reach of children.
• Do not mix with other cleaning chemicals.
• Keep people away from wet treated floors.
• Follow the flooring manufacturer’s care instructions.

For additional workplace chemical safety information, visit the Health and Safety Executive COSHH guidance.

Professional Floor Cleaning Supplies from ATC

ATC Cleaning & Janitorial Supplies provides professional floor care products, cleaning machines and janitorial essentials for businesses across Swindon, Wiltshire and Gloucestershire.

In addition, our family-run business can help customers select suitable products for commercial floor maintenance.

You can browse our professional cleaning supplies to find more products for your workplace.

For manufacturer information, visit the Prochem website.

Why Choose Prochem Proshine Floor Polish?

Prochem Proshine Floor Polish combines a durable metalised emulsion coating with a professional high-gloss finish. Therefore, it is well suited to businesses looking for an attractive and practical floor care solution.

Furthermore, the 25% polymer solids formula supports long-lasting protection. Its ready-to-use, self-shining finish also helps simplify routine application.

Order Prochem Proshine Floor Polish 5L from ATC Cleaning & Janitorial Supplies today. For product advice or larger orders, call 01793 481416 or email sales@atcjanitorial.co.uk.